Head light Tint , Rolls comes 15 inches x 50 yards ( 150 feets )
Most popular color is dark grey 073
please when you pay let me know wich color you need
 Golden Yellow 020
|
 Yellow 021
|
 Brimstone Yellow 025
|
 Dark Red 030
|
 Red 031
|
 Light Red 032
|
 Red Orange 033
|
 Orange 034
|
 Violet 040
|
 Pink 041
|
 Orange Red 047
|
 King Blue 049
|
 Gentian Blue 051
|
 Azure Blue 052
|
 Light Blue 053
|
 Turquoise 054
|
 Ice Blue 056
|
 Traffic Blue 057
|
 Dark Green 060
|
 Green 061
|
 Lime-Tree Green 063
|
 Grass Green 068
|
 Dark Grey 073
|
 Middle Grey 074
|
 Telemagenta 077
|
 Reddish Brown 079
|
 Pale pink 085
|
 Salmon Pink 089
|
 Steel Blue 096
|
 Blue Green
|
ORACAL
® Series 8300 Transparent Cal
Description
Special transparent colored PVC film with UV stabilizers. Available in 30 radiant colors with gloss finish.
Release Paper
84# custom silicone-coated paper with special release characteristics that provide excellent weeding and release
values.
Adhesive
Solvent polyacrylate, permanent
Applications
Designed for permanent markings for internally illuminated signs and window graphics. Suitable for both wet and dry
applications. Thermal-transfer compatible.
Technical Data
Thickness
(without protective paper and adhesive) 3 mil
Dimensional Stability
length, < .016"
Adhered to steel, no measurable shrinkage in cross direction; in
Temperature Resistance
Adhered to acrylic, -40°F to +176°F, no variation
Adhesive Power
(FINAT TM-1, after 24 h, average) Adhered to glass: 4.1 lb/in2
Adhered to acrylic: 3.7 lb/in
2
Resistance to Cleaning Agents
agents) at room temperature and 149°F, no variation.
Adhered to acrylic, after 8 hours (in 0.5% household cleaning
Tensile Strength
Along
Across
Min. 19 MPa
Min. 19 MPa
(DIN EN ISO 527)
Elongation at Break
Along
Across
Min. 130%
Min. 150%
(DIN EN ISO 527)
Seawaterability
(DIN 50 021) N/A
Shelf Life
(68°C/50% relative humidity)
2 years
Minimum Application Temperature
46°F
Available Lengths
Available Widths
50-yard rolls
Minimum Life Expectancy
application procedures on vertical surfaces)
5 years
(based on accepted
Attention
Surfaces to which the material will be applied must be cleaned thoroughly of dust, grease or any contaminants. Freshly lacquered or painted surfaces should be allowed
to stand for at least three weeks after complete curing. The compatibility of selected lacquers and paints should be tested by the end-user prior to use.
The statements in this information sheet are based upon our knowledge and practical experience. This data is intended only as a source of information and is given
without any guarantee and does not constitute a warranty. Due to the wide variety of possible uses and applications, customers should independently determine the
suitability of this material for their specific purpose, prior to use.
|